ihelp - GTX-L Cadillac Scooter
1/ Carefully remove your new GTX-L Cadillac Scooter from its crate. No claims are accepted for any accidental scratches.
2/ The front stearing column is intentionally left half-painted.
3/ Install the handlebar. Carefully push the electrical wires to the side to gain access for inserting the screw.
3/ Install the handlebar. Carefully push the electrical wires to the side to gain access for inserting the screw.
4/ Install the front fender. Gently press it into place between the forks.
use these screws to attach it to the frame
5/ Install the front cover.
slide the plastic nip in the slot on the body
firmly press the panel into place
6/ Install the front wheel
insert the two spacers in the wheel (short one to the brake side)
gently force the brake pads apart (do not brake them)
make sure the disc is between the pads
8/ Install the back rest
push the side of the seat with your fingers to tuch the pre-driller holes - 2 on each side and press the screw driver to puncture holes into the leather
place the back rest on the seat and screw it on with these screws
place the back rest on the seat and screw it on with these screws
9/ Install the headrest
10/ Install the rear basket
unzip the leather on the back and reach up to the back to locate the pre-drilled holes on each side
puncture two holes in the leather
sometimes you may have to enlarge the holes with a drill for the screws to align with the thread in the seat
use the holes positioned at the highest point
11/ Install the reviews mirrors
you can adjust them by the nuts on the end of the stems
